Operation Manual

User Manual of Network Camera

Safety Warnings and Cautions

Please pay attention to the following warnings and cautions:

Hazardous Voltage may be present: Special measures and

precautions must be taken when using this device. Some potentials

(voltages) on the device may present a hazard to the user. This

device should only be used by employees from our company with

knowledge and training in working with these types of devices that

contain live circuits.

Power Supply Hazardous Voltage: AC mains voltages are present within the power

supply assembly. This device must be connected to a UL approved, completely

enclosed power supply, of the proper rated voltage and current. No user serviceable

parts inside the power supply.

System Grounding (Earthing): To avoid shock, ensure that all AC wiring is not

exposed and that the earth grounding is maintained. Ensure that any equipment to

which this device will be attached is also connected to properly wired grounded

receptacles and are approved medical devices.

Power Connect and Disconnect: The AC power supply cord is the

main disconnect device to mains (AC power).The socket outlet shall

be installed near the equipment and shall be readily accessible.

Installation and Maintenance: Do not connect/disconnect any

cables to or perform installation/maintenance on this device during an electrical

storm.