Operation Manual

User Manual of Network Camera

Figure 6-2 Time Settings

 Select the Time Zone.

Select the Time Zone which is the closest to the location of the camera from the

drop-down menu.

Figure 6-3 Time Zone Settings

 Synchronizing Time by NTP Server.

(1) Check the checkbox to enable the NTP function.

(2) Configure the following settings:

Server Address: IP address of NTP server.

NTP Port: Port of NTP server.

Interval: The time interval between the two synchronizing actions with NTP

server.

Figure 6-4 Time Sync by NTP Server

Note: If the camera is connected to a public network, you should use a NTP server

that has a time synchronization function, such as the server at the National Time

Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP

software can be used to establish a NTP server for time synchronization.

 Synchronizing Time Synchronization Manually

Enable the Manual Time Sync function and then click to set the system time