Operation Manual

User Manual of Network Camera

If there is not a WPS button on the camera, you can also click the virtual button to

enable the PBC function on the web interface.

Click button.

When the PBC mode is both enabled in the router and the camera, the camera and

the wireless network is connected automatically.

PIN Mode:

The PIN mode requires a Personal Identification Number (PIN) to be read from either

a sticker or the display on the new wireless device. This PIN must then be entered to

connect the network, usually the Access Point of the network.

Steps:

1. Choose a wireless connection on the list and the SSID is shown.

Figure 4-8 Wi-Fi Settings – WPS PIN Mode

2. Choose the .

If the PIN code is generated from the router side, you should enter the PIN code you

get from the router side in the field.

3. Click button.