Operation Manual

User Manual of Network Camera

Note: You can click or on each column heading to order the

information; you can click to expand the device table and hide the

network parameter panel on the right side, or click to show the

network parameter panel.

 Modify network parameters

Steps:

1. Select the device to be modified in the device list and the network parameters of

the device will be displayed in the Modify Network Parameters panel on the

right side.

2. Edit the modifiable network parameters, e.g. IP address and port number.

3. Enter the password of the admin account of the device in the Password field and

click to save the changes.

Figure A.1.2 Modify Network Parameters

 Restore default password

Steps:

1. Contact our technical engineers to get the serial code.

Note: Serial code is a series of characters combined by the start time and the serial

number of the device.

2. Input the code in the Serial code field and click to restore the default

password.