Operation Manual

User Manual of Network Camera

Figure 6-37 Snapshot Settings

6.6.9 Configuring Other Alarms

Purpose:

This section is for the camera supporting external wireless alarm (e.g. access control

alarm), embedded PIR (passive infrared sensor) alarm and manual alarm by remote

control.

Study the wireless alarm and the remote control

Purpose:

The wireless alarm is the function of the camera to communicate to wireless alarm

devices such as the access control. The remote control or other remote alarm devices

must be compatible and learn each other’s remote signal to communicate.

Before configure the wireless alarm, the camera must study the code of the wireless

alarm device.

Steps:

1. Enter the Remote Control interface:

Configuration> Advanced Configuration> System > Remote Control