Operation Manual

User Manual of Network Camera

Figure 6-36 Email Settings

3. Configure the following settings:

Sender: The name of the email sender.

Sender’s Address: The email address of the sender.

SMTP Server: The SMTP Server IP address or host name (e.g.,

smtp.263xmail.com).

SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25 (not secured).

And the SSL SMTP port is 465.

Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP

server.

Attached Image: Check the checkbox of Attached Image if you want to send

emails with attached alarm images.

Interval: The interval refers to the time between two actions of sending attached

pictures.

Authentication (optional): If your email server requires authentication, check

this checkbox to use authentication to log in to this server and enter the login

user Name and password.

Choose Receiver: Select the receiver to which the email is sent. Up to 2 receivers

can be configured.

Receiver: The name of the user to be notified.

Receiver’s Address: The email address of user to be notified.

4. Click to save the settings.