Operation Manual

User Manual of Network Camera

Figure 6-32 Alarm Input Settings

3. Click to set the arming schedule for the alarm input. Refer to Step 2

Set the Arming Schedule for Motion Detection in Section 6.6.1.

4. Check the checkbox to select the linkage method taken for the alarm input. Refer

to Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.

5. You can also choose the PTZ linking for the alarm input if your camera is installed

with a pan/tilt unit. Check the relative checkbox and select the No. to enable

Preset Calling, Patrol Calling or Pattern Calling.

6. You can copy your settings to other alarm inputs.

7. Click to save the settings.

Figure 6-33 Linkage Method