Operation Manual

User Manual of Network Camera

Figure 6-31 Video Loss

2. Check the Enable Video Loss Detection checkbox to enable the video loss

detection.

3. Click to edit the arming schedule for video loss detection. The

arming schedule configuration is the same as the setting of the arming schedule for

motion detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in

Section 6.6.1.

4. Check the checkbox to select the linkage method taken for the video loss alarm.

Audible warning, notify surveillance center, send email and trigger alarm output are

selectable. Please Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.

5. Click to save the settings.

6.6.4 Configuring External Alarm Input

Steps:

1. Enter the Alarm Input Settings interface:

Configuration > Advanced Configuration> Events > Alarm Input:

2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO

(Normally Open) and NC (Normally Closed). Edit the name to set a name for the

alarm input (optional).