Operation Manual

User Manual of Network Camera

(1) Click to edit the arming schedule. The Figure 5-28 shows the

editing interface of the arming schedule.

(2) Choose the day you want to set the arming schedule.

(3) Click to set the time period for the arming schedule.

(4) After you set the arming schedule, you can copy the schedule to other days

(Optional).

(5) Click to save the settings.

Note: The time of each period can’t be overlapped. Up to 4 periods can be

configured for each day.

Figure 6-28 Arming Time Schedule

3. Set the Alarm Actions for Motion Detection.

Purpose:

You can specify the linkage method when an event occurs. The following

contents are about how to configure the different types of linkage method.

Figure 6-29 Linkage Method

Steps:

(1) Check the checkbox to select the linkage method. Audible warning, notify