Operation Manual

User Manual of Network Camera

Figure 6-21 Display Settings

Descriptions of parameter configuration:

Overexposure Prevention: Enable or disable the function in this field.

Exposure Time:

Value ranges from 1/25 to 1/100,000s. Adjust it according to the lightening condition.

Iris Mode:

Auto and Manual are selectable.

Video Standard:

50 Hz and 60 Hz are selectable. Choose according to the different video standards;

normally 50Hz for PAL standard and 60Hz for NTSC standard.

Day/Night Switch:

Day, Night and Auto are selectable.

Mirror：

The mirror function enables you to view another aspect of the image. You can flip the

image horizontally and vertically. It can be used to view the image in the way you see

it directly using your eyes.

BLC Area:

BLC area is the area sense the light intensity; Close, Up, Down, Left, Right and Center

are selectable.

White Balance: The below figure shows the white balance type selectable. You can

choose it according to the real condition. For example, if in the surveillance scene,

there is a fluorescent lamp, you can choose the white balance type as the

Fluorescent Lamp.