Operation Manual

User Manual of Network Camera

2.1.2 Detecting and Changing the IP Address

You need the IP address to visit the network camera.

Steps:

1. To get the IP address, you can choose either of the following methods:

 Use SADP, a software tool which can automatically detect the online

network cameras in the LAN and list the device information including IP

address, subnet mask, port number, device serial number, device version,

etc., shown in Figure 2-3.

 Use the client software to list the online devices. Please refer to the user

manual of client software for detailed information.

2. Change the IP address and subnet mask to the same subnet as that of your

computer.

3. Enter the IP address of network camera in the address field of the web browser

to view the live video.

Notes:

 The default IP address is 192.0.0.64 and the port number is 8000. The default

user name is admin, and password is 12345.

 For accessing the network camera from different subnets, please set the gateway

for the network camera after you logged in. For detailed information, please

refer to Section 5.3.1 Configuring TCP/IP Settings.

Figure 2-3 SADP Interface