User Manual

Network Camera User Manual
77
Note:
Only when the UPnP™ function is enabled, ports of the camera are active.
3. Choose a friendly name for the camera, or you can use the default name.
4. Select the port mapping mode. Manual and Auto are selectable.
Note:
If you select Auto, you should enable UPnP™ function on the router.
If you select Manual, you can customize the value of the external port and
complete port mapping settings on router manually.
5. Click Save to save the settings.
7.1.6 Configuring Multicast
Purpose:
Multicast is group communication where data transmission is addressed to a group
of destination devices simultaneously. After setting up active multicast, you can send
the source efficiently to multiple devices.
Setting Multicast
Steps:
1. Enter the Multicast settings interface.