User Manual

Network Camera User Manual
60
IP Address Filter Interface
2. Check Enable IP Address Filter.
3. Select the IP Address Filter Type in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click the Add to add an IP.
(2) Check IP or IP Segment.
(3) Input the IP Address or IP Segment.
Add an IP
(4) Click the OK to finish adding.
 Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.