User Manual

Network Camera User Manual
53
Configuration > System > System Settings > metadata Settings
2. Check the checkbox of the corresponding function to enable the metadata
function.
 The metadata of the smart event includes the target ID, target coordinate and
time information.
 The metadata of queue management includes the rule information, region ID,
target ID, target coordinate and time information. The camera detects the whole
image by default. If you have set the region in the queue management settings,
the camera detects the configured region.
 The metadata of face capture includes the rule information, target ID, target
coordinate, face grading and time information. The camera detects the whole
image by default. If the region is configured in the face capture settings, the
camera detects the configured region.
3. Check Enable Stream Rule to overlay the stream rule on the live view image.
Make sure you have checked Sub-stream and selected the Sub-stream in the live
view.
4. Check Overlay Rule Frame and Target Frame on Background Picture to enable
the function. Make sure you have checked Sub-stream and selected the
Sub-stream in the live view.
Note: Only certain camera models support the function.
6.2.9 Open Source Software License
Information about the open source software that applies to the IP camera can be
checked if required. Go to Configuration > System Settings > About.
Maintenance
Upgrade & Maintenance
Purpose: