User Manual

Network Camera User Manual
178
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces. Please
refer to 10.1.1 Configuring Motion Detection and 10.1.3 Configuring Alarm
Input for detailed information.
 Record Triggered by Events
If you select Event, the video will be recorded if any of the events is triggered.
Besides configuring the recording schedule, you have to configure the event
settings.
5. Select the record type, and click-and-drag the mouse on the time bar to set the
record schedule.
6. Click Save to save the settings.
Configure Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The
captured picture can be stored in the local storage or network storage.
Steps:
1. Enter the Capture Settings interface: Configuration > Storage > Storage Settings >
Capture.