User Manual

Network Camera User Manual
176
3. Click Advanced to set the camera record parameters.
Record Parameters
 Pre-record: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s,
30s or not limited.
 Post-record: The time you set to stop recording after the scheduled time or
the event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or
10 min.
 Stream Type: Select the stream type for recording.
 Expired Time: The expired time should be 1 to 90 days and seven days is the
default expired time. If you enable the function in 8:00, January 2, and set
the expired time to 1 day, you can only see the recordings between 8:30,
January 1 and 8:30 January 2 if you check the recording on 8:30, January 2.
The recording before 8:30, January 1 will be deleted and cannot be