User Manual

Network Camera User Manual
113
5. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas you
set without saving them.
6. Click Add to add the privacy mask, and it will be listed in the Privacy Mask List
area.
7. Modify the mask settings.
Type: you can specify black for the mask or set it as mosaic.
Note: The mosaic option is only supported by certain camera models
8. Click Save to save the mask.
9. Repeat above steps to set other masks.
10. (Optional) To delete a saved mask, select the mask in the list, and click Delete.
Configuring Picture Overlay
Purpose:
Picture overlay enables you to overlay a picture on the image. This function enables a
certain enterprise or users to overlay their logo on the image.
Steps:
1. Enter the Picture Overlay Settings interface, Configuration > Image > Picture
Overlay.
Picture Overlay