User Manual

Network Camera User Manual
37
4. Click OK to finish the user modification.
 Deleting a User
Steps:
1. Click to select the user you want to delete and click Delete.
2. Click OK on the pop-up dialogue box to confirm the deletion.
 As Operator or User
Operator or user can modify password. Old password is required for this action.
Security Question
Purpose:
Security question is used to reset the admin password when admin user forgets the
password.
Set Security Question:
You can set the security questions during camera activation. Or you can set the
function at user management interface.
Security question setting is not cleared when you restore the camera (not to default).
Steps:
1. Enter setting interface:
Configuration > System > User Management > User Management
2. Click Security Question.
3. Input correct admin password.
4. Select questions and input answers.
5. Click OK to save the settings.
Reset Admin Password:
Before you start:
The PC used to reset password and the camera should belong to the same IP address
segment of the same LAN.
Steps:
1. Enter login interface via web browser.