Quick Start Guide
Table Of Contents
Dual-Lens People Counting CameraยทQuick Start Guide
19
3. Drill screw holes and plan cable routing.
4. (Optional) If you use expansion screws, screw in the expansion
screws
5. Loosen the screws on the side to rotate the camera to the
desired angle and fasten the screws.
Rotate the Camera
6. Place the spring washer and flat washer into the screw, and
then route the screw though the camera and the vehicle ceiling.
Fasten the screw to fix the camera.
Fix the Camera
7. (Optional) If you use expansion screws, place the camera into
the holes and fasten the camera with the screws.