DS-2CD6825G0-C-IVS-User-Manul

Dual-Lens People Counting Camera User Manual
67
Chapter 10 Event Settings
10.1 Basic Events
You can configure the basic events by following the instructions in this section,
including video tampering, alarm input, alarm output, and exception, etc. These
events can trigger the linkage methods, such as Notify Surveillance Center, Send
Email, Trigger Alarm Output, etc.
Note: Check the checkbox of Notify Surveillance Center if you want the alarm
information to be pushed to PC or mobile client software as soon as the alarm is
triggered.
10.1.1 Configuring Video Tampering Alarm
Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take
certain alarm response actions.
Steps:
1. Enter the video tampering Settings interface, Configuration > Event > Basic
Event > Video Tampering.