DS-2CD6825G0-C-IVS-User-Manul

Dual-Lens People Counting Camera User Manual
50
implementation of networks in the home and corporate environments.
With the function enabled, you don’t need to configure the port mapping for each port,
and the camera is connected to the Wide Area Network via the router.
Steps:
1. Enter the NAT settings interface. Configuration > Network > Basic Settings >
NAT.
2. Check the checkbox to enable the UPnP™ function.
3. Choose a nickname for the camera, or you can use the default name.
4. Select the port mapping mode. Manual and Auto are selectable. And for manual
port mapping, you can customize the value of the external port.
5. Click Save to save the settings.
Figure 7-5 UPnP Settings
7.2 Configure Advanced Settings
Purpose:
You can configure the parameters, including FTP, Email, HTTPS, QoS, 802.1x, etc.,
by following the instructions in this section.
7.2.1 Configuring FTP Settings
Purpose:
You can configure the FTP server related information to enable the uploading of the
captured pictures to the FTP server. The captured pictures can be triggered by events