DS-2CD6825G0-C-IVS-User-Manul
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 People Counting
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- Chapter 7 Network Settings
- Chapter 8 Video/Audio Settings
- Chapter 9 Image Settings
- Chapter 10 Event Settings
- Chapter 11 Storage Settings
- Chapter 12 Playback
- Chapter 13 Picture
- Chapter 14 Application
- Appendix
Dual-Lens People Counting Camera User Manual 
46 
Figure 7-1 TCP/IP Settings 
2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 
Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings 
and Multicast Address. 
3. (Optional) Check the checkbox of Enable Multicast Discovery, and then the 
online network camera can be automatically detected by client software via 
private multicast protocol in the LAN. 
4. Configure the DNS server. Input the preferred DNS server, and alternate DNS 
server. 
5.  Click Save to save the above settings. 
Notes:   
  The valid value range of MTU is 1280 ~ 1500.   
  The Multicast sends a stream to the multicast group address and allows multiple 
clients to acquire the stream at the same time by requesting a copy from the 
multicast group address. Before utilizing this function, you have to enable the 










