DS-2CD6825G0-C-IVS-User-Manul

Dual-Lens People Counting Camera User Manual
20
Figure 4-4 Linkage Method
 Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
4.1.2 Data Uploading Setting
Data uploading is about how and when the counting data can be sent to clients and
users.
 You can upload people counting data to surveillance center and client software
through SDK and HTTP (if configured).
To upload real-time data, check the Real-Time Upload Data checkbox.
To upload data regularly, set the Data Statistics Cycle as desired.
Note: If data uploading by HTTP is required, set up the HTTP Data Transmission
parameters.
 You can send people counting report to configured email address.
Select report type (daily report, weekly report, monthly report, and annual report)
to activate the function.
Note: Go to Configuration > Network > Advanced Settings > Email to set up
email. Refer to Section 7.2.2.
4.1.3 Advanced Settings
Advanced page shows some maintenance settings which are not necessary for proper
functioning.
 Display Rule info. on Stream
Check to write rule information of people counting on video stream.
 Display Height