DS-2CD6825G0-C-IVS-User-Manul

Dual-Lens People Counting Camera User Manual
15
Chapter 4 People Counting
Purpose:
People counting function is used to calculate the number of people entering, exiting,
and passing by an area. It is widely applied to the entrances and exits.
Before you start:
The camera is recommended to be installed right above the entrance/exit, and make
sure it is installed properly.
Refer to Quick Start Guide of Dual-Lens People Counting Camera for installation
advice.
About the task:
Configuration for Mobile Model and Non-Mobile Model are different:
 Non-Mobile Model Camera, see Section 4.1
 Mobile Model Camera, see Section 4.2
4.1 Non-Mobile Model Configuration
To complete the configuration, you should:
 Set up counting rule.
 Set up data uploading.
 Set up advanced parameters.
4.1.1 Rule Settings
Rule setting is compulsory for proper functioning of the camera.
Rule
Steps:
1. Enter configuration interface: Configuration > People Counting
2. Enable people counting function.
3. Set up camera calibration. Auto calibration and manual calibration are selectable.