DS-2CD6825G0-C-IVS-User-Manul
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 People Counting
- Chapter 5 Live View
- Chapter 6 Network Camera Configuration
- Chapter 7 Network Settings
- Chapter 8 Video/Audio Settings
- Chapter 9 Image Settings
- Chapter 10 Event Settings
- Chapter 11 Storage Settings
- Chapter 12 Playback
- Chapter 13 Picture
- Chapter 14 Application
- Appendix
Dual-Lens People Counting Camera User Manual 
12 
Chapter 3   Access to the Network 
Camera 
3.1  Accessing by Web Browsers 
Steps: 
1. Open the web browser. 
2. In the browser address bar, input the IP address of the network camera, and press 
the Enter key to enter the login interface. 
Note:   
The default  IP address is  192.168.1.64.  You  are recommended to  change the  IP 
address to the same subnet with your computer. 
3. Input the user name and password and click Login. 
The admin user should configure the device accounts and user/operator permissions 
properly. Delete the unnecessary accounts and user/operator permissions. 
Note: 
The IP address gets locked if the admin user performs 7 failed password attempts 
(5 attempts for the user/operator). 
Figure 3-1 Login Interface 
4. Click Login. 
5. Install the plug-in before viewing the live video and operating the camera. Follow 
the installation prompts to install the plug-in. 










