User Manual

Network Camera User Manual
112
Chapter 11 People Counting
Purpose:
People function is used to calculate the number of object entered or exited a certain
configured area and it is widely applied to the entrances or exits.
Before you start:
The camera is recommended to be installed right above the entrance/exit, and make
sure it is installed properly.
Refer to Quick Start Guide of Dual-Lens People Counting Camera for installation
advice.
About the task:
Configuration for Mobile Model and Non-Mobile Model are different:
To complete the configuration, you should:
 Set rule
 Set shield region
 Set data uploading
 Set overlay and capture parameters
 Set advanced parameters
11.1 Set the Rule
Rule
For Non-Mobile Models
Steps:
1. Enter the People Counting Configuration interface: VCA > VCA Resource >
People Counting.