Quick Start Guide
Table Of Contents
- 1 Appearance Description
- 2 Installation
- 3 Setting the Network Camera over the LAN
- 4 Accessing via Web Browser
- 5 Operating via Hik-Connect App
Network Covert CameraยทQuick Start Guide
34
34
Drill on the Surface
Make sure that the drilling hole is big enough for the camera lens.
2. Remove a side of the adhesive tape on the bracket. Paste the
bracket on the mounting surface with aligning with the drilling
hole. As shown in figure below.
Paste the Bracket
3. Install the cylindrical sensor into the mounting hole in the round
rail bracket.