Quick Start Guide
Table Of Contents
- 1 Appearance Description
- 2 Installation
- 3 Setting the Network Camera over the LAN
- 4 Accessing via Web Browser
- 5 Operating via Hik-Connect App
Network Covert CameraยทQuick Start Guide
22
22
Drill on the Surface
Make sure the drilling hole is big enough for the camera lens.
2. Remove a side of the adhesive tape on the bracket. Paste the
bracket on mounting surface by aligning with the drilled hole.
Paste the Bracket
3. Install the block-shaped sensor unit into the bracket and make it
to be buckled.