User Manual

User Manual of Network Fisheye Camera
85
Figure 9-3 Linkage Method Settings
 Audible Warning
Trigger the audible warning locally. And it only supported by the device that
has the audio output.
 Notify Surveillance Center: Send an exception or alarm signal to remote
management software when an event occurs.
 Send Email: Send an email with alarm information to a user or users when
an event occurs.
Note: To send the Email when an event occurs, please refer to Section 5.3.8
to complete Email setup in advance.
 Upload to FTP/Memory Card/NAS: Capture the image when an alarm is
triggered and upload the picture to the configured FTP server, memory card
and NAS.
Notes:
• Set the FTP address and the remote FTP server first. Refer to Section
5.3.7 Configuring FTP Settings for detailed information.
• The captured image can also be uploaded to the available memory card
or network disk (NAS). Go to Configuration > Storage > Storage
Management to set the memory card and NAS.
• Go to Configuration > Storage > Schedule Settings > Capture >
Capture Parameters page, enable the event-triggered snapshot, and set
the capture interval and capture number.