User Manual

User Manual of Network Fisheye Camera
92
Note: Alarm output settings vary according to the camera model.
9.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to select the linkage method taken for exception. For details,
refer to Task 3: Set Linkage Method for Motion Detection in Section 5.6.1.
Figure 9-8 Exception Settings
3. Click Save to save the settings.
9.6 Configuring Audio Exception Detection
Purpose:
Audio exception detection function detects the abnormal sounds in the surveillance
scene, such as the sudden increase/decrease of the sound intensity, and some certain
actions can be taken when the alarm is triggered.
Note: Audio exception detection function varies according to different camera
models.
Steps:
1. Enter the Audio Exception Detection settings interface, Configuration > Event >
Smart Event > Audio Exception Detection.