User Manual

User Manual of Network Fisheye Camera
98
dynamic environment. You should set a comparatively higher value if the
monitoring scene changes fast. Setting the level properly will avoid the
misinformation. The default level is 50.
Minimum Target Size [0 to 100]: It refers to the minimum target size that can be
recognized and counted in a heat map. The default size is 50.
Target Track: Select ON or OFF to enable or disable the tracking of the target. If
the target tracking is turned off, the target would not be counted in a heat map
right after it stops moving. If the target tracking is turned on, the target would not
be counted in a heat map until it stops for a while.
Figure 5-54 Heat Map Configuration
5. Go to Arming Schedule tab, and click-and-drag the mouse on the time bar to set
the arming schedule.