User Manual

User Manual of Network Fisheye Camera
72
It refers to the smoothness of the stream. The higher value of the smoothing, the
better fluency of the stream is, though, the video quality may not be so satisfactory.
The lower value of the smoothing, the higher quality of the stream is, though it
may appear not fluent.
5. (Optional) Click Copy to to copy the parameters of the set camera channel to
other channels.
6. Click Save to save the settings.
5.4.2 Configuring Audio Settings
Steps:
1. Enter the Audio Settings interface
Configuration > Video/Audio > Audio
Figure 5-36 Audio Settings
2. Configure the following settings.
Audio Encoding: G.711 ulaw, G.711alaw, G.726, G.722.1, MP2L2 and PCM are
selectable. For MP2L2, the Sampling Rate and Audio Stream Bitrate are
configurable. For PCM, the Sampling Rate can be set.
Audio Input: MicIn and LineIn are selectable for the connected microphone and
pickup respectively.
Input Volume: 0 to 100.
Environmental Noise Filter: Set it as OFF or ON. When you turn on the
function, detected noise can be filtered out.
3. Click Save to save the settings.