User Manual

User Manual of Network Fisheye Camera
46
Please configure network disk for the camera or insert a memory card in the camera.
Steps:
1. Enter log searching interface:
Configuration > System > Maintenance > Log
Figure 5-10 Log Searching Interface
2. Set the log search conditions to specify the search, including the Major Type,
Minor Type, Start Time and End Time.
3. Click Search to search log files. The matched log files will be displayed on the
Log interface.
4. Click Export to export and save the log files in your computer.
5.2.7 System Service Settings
Purpose:
System service settings refer to the hardware service that the camera supports, and it
varies according to the different cameras.
For the cameras support IR Light, you can go to the hardware service, and select to
enable or disable the service according to the actual demands.
Go to Configuration > System > Maintenance > System Service to enter the system
service settings interface.
Figure 5-11 System Service Setting