User Manual
Table Of Contents
- Chapter 1 System Requirement
- Chapter 2 Network Connection
- Chapter 3 Access to the Network Camera
- Chapter 4 Live View
- Chapter 5 Network Camera Configuration
- 5.1 Configuring Local Parameters
- 5.2 Configuring System Settings
- 5.2.1 Viewing Basic Information
- 5.2.2 Time and DST Settings
- 5.2.3 RS-232 Settings
- 5.2.4 RS-485 Settings
- 5.2.5 Upgrade and Maintenance
- 5.2.6 Log Searching
- 5.2.7 System Service Settings
- 5.2.8 Authentication
- 5.2.9 IP Address Filter
- 5.2.10 Security Service
- 5.2.11 User Management
- 5.2.12 Open Source Software License
- 5.3 Configuring Network Settings
- 5.3.1 Configuring TCP/IP Settings
- 5.3.2 Configuring Port Settings
- 5.3.3 Configuring PPPoE Settings
- 5.3.4 Configuring DDNS Settings
- 5.3.5 Configuring NAT (Network Address Translation) Settings
- 5.3.6 Configuring SNMP Settings
- 5.3.7 Configuring FTP Settings
- 5.3.8 Email Settings
- 5.3.9 Configuring HTTPS Settings
- 5.3.10 Configuring QoS Settings
- 5.3.11 Configuring 802.1X Settings
- 5.4 Configuring Video and Audio Settings
- 5.5 Configuring Image Parameters
- 5.6 Configuring Event Settings
- 5.7 Configuring Heat Map
- Chapter 6 Storage Settings
- Chapter 7 Playback
- Chapter 8 Picture
- Chapter 9 Application
- Appendix
User Manual of Network Fisheye Camera
26
Table 4-1 Description of Mount Types
Mount Type Icon
Description
Ceiling mounting.
Wall mounting.
Table mounting.
Display Mode
You can select a display mode for the layout of the live view window. The
description of each display mode is shown in the following table.
Fisheye View: In the Fisheye View mode, the whole wide-angle view of the
fisheye camera is displayed. This view mode is called Fisheye View because
it approximates the vision of a fish’s convex eye. The lens produces
curvilinear images of a large area, while distorting the perspective and angles
of objects in the image.
Panorama View: In the Panorama View mode, the round fisheye image is
transformed to rectangular image by some calibration methods.
PTZ View: The PTZ View is the close-up view of some defined area in the
Fisheye View or Panorama View.
Note: Each PTZ View is marked on the Fisheye View and Panorama View with a
specifically colored region under software decoding mode, and with a specific
navigation box under hardware decoding mode.
Table 4-2 Description of Display Modes
Mode
Description
Mode
Description
Fisheye view.
180 degrees panorama view.
360 degrees panorama view.
Live view with a 360 degrees
panorama view and a PTZ view.
Live view with a 360 degrees
panorama view and 3 PTZ views.
Live view with a 360 degrees
panorama view and 6 PTZ
views.
Live view with a 360 degrees
panorama view and 8 PTZ views.
Live view with 2 PTZ views.