Quick Start Guide
Table Of Contents
Network Fisheye CameraยทQuick Start Guide
19
19
Wall Mounting with a Junction Box 2.3
You have to purchase a junction box separately if this mounting
method is selected.
Steps:
1. Fix the junction box to the wall with screws.
Fix the Junction Box Figure 2-9
2. Screw the three supplied screws half-deep to the junction box.
3. Connect the corresponding power cable, network cable, audio
and alarm cables.
4. Align the screw holes to the inserted screws, hook the camera
body to the screws, and route the camera body to secure the
camera with the screws.
5. Screw the half-deep screws into the wall totally.
6. Install the camera cover to the camera body, and fix them by
tightening the screw on the camera cover.