Quick Start Guide

Network Fisheye Camera·Quick Start Guide
15
15
3. Connect the corresponding power cable, network cable, audio
and alarm cables.
4. Align the screw holes to the inserted screws, hook the camera
body to the screws, and route the camera body to secure the
camera with the screws.
5. Hammer the half-deep screws into the ceiling totally.
6. Install the camera cover to the camera body, and fix them by
tightening the lock screw on the camera cover.
Install the Camera Figure 2-3
Tighten the Lock Screw on the Camera Cover Figure 2-4