User Manual

User Manual of Network Fisheye Camera
86
 Smart Tracking: It can make the speed dome to track target manually by
clicking the target on the live view of fisheye camera.
Note: In order to make smart tracking take effect, you need to have a speed
dome which has auto tracking function installed near your fisheye camera,
and you have to configure relevant settings on 4200 Client Software. Refer to
the user manual of 4200 Client Software for detailed information.
 Trigger Channel: The video will be recorded when the motion is detected.
You have to set the recording schedule first.
 Trigger Alarm Output: Trigger one or more external alarm outputs when an
event occurs.
Note: Go to Advanced Configuration > Basic Event > Alarm Output page,
set the arming schedule of the alarm output.
 Expert Mode
Figure 9-4 Motion Detection Settings-Expert Mode
If Expert is selected as the configuration mode, different sets of parameters are
adopted for motion detection at day and night.
 Day/Night Switch OFF
Steps:
(1) Draw the detection area as in the normal configuration mode. The