Owners manual
Network Fisheye Camera·Quick Operation Guide
12
12
● Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing reflection.
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
2.1 Ceiling Mounting
Steps:
1. Drill three screw holes and the cable hole according to the
supplied drill template.
Drill Template Figure 2-1
2. Fix the three supplied screws half-deep to the ceiling, leaving
enough space to hook the camera body.
TOP
Drill Template
1
1
1
HoleA: for cables routed through the ceiling
Screw hole 1: for Mounting Base
A