Quick Start Guide

Network Bullet Camera·Quick Start Guide
10
10
No.
Description
3
Sun Shield
4
3-axis Bracket
5
Reset Button
6
Memory Card Slot
7
Serial Port
The standard power supply is 12V DC, please make sure your
power supply matches with your camera.
Press RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user name,
password, IP address, port No., etc.
1.2 Cable Description
This camera series has several camera models, each of which may
have different cable group. The following figures and tables show the
description of all possible cables in this camera series.