Quick Start Guide

Network Bullet Camera·Quick Start Guide
19
19
4. Route the cables.
5. Fix the camera to the junction box with screws.
6. Adjust the surveillance angle. See step 4 in Section 2.2.
7. Install the water-proof jacket. See Section 2.5.
Wall
Drill
Template
Junction
Box
Camera
Bracket
Screw Hole 2
Installation with a Junction Box Figure 2-8
Wall Mounting with a Gang Box 2.4
Before you start:
If you choose this mounting type, you have to prepare a gang box
and an adapter plate in advance.
Note that the size and screw holes of the adapter plate should match
those of the camera and the gang box at the same time. For the size
and screw holes of the camera bracket, see Figure 2-7.