Quick Start Guide

Network Bullet Camera·Quick Start Guide
18
18
Wall Mounting with a Junction Box 2.3
Before you start:
A junction box is not included in the package. If you choose this
mounting type, you have to prepare a junction box in advance. Note
that the size and screw holes of a junction box should match those of
the camera.
Bracket Bottom Overview Figure 2-7
Steps:
1. Paste the drill template on the desired mounting place on wall.
2. Drill the screw holes for the junction box according to Hole 2 of
the drill template. See Figure 2-3.
(Optional) If you want to route cables through the wall, cut a hole
according to Hole A of the drill template. See Figure 2-3.
3. Align the screw holes of the junction box to the drill template, and
fix the junction box to the wall with screws.