Quick Start Guide

Network Bullet Camera·Quick Start Guide
17
17
It is recommended to adopt the water-proof jacket (supplied) for
the network interface when the camera is installed outdoor. See
Section 2.5.
4. Adjust the surveillance angle with supplied wrench.
1). Loosen No.1 lock screw to adjust the tilt angle [0 ° to 100°].
2). Loosen No.2 lock screw to adjust the pan angle [0° to 360°].
3). Loosen No.3 lock screw to rotate the camera [0° to 360°].
4). Tighten the lock screws.
0° to 360°
1
2
3
0° to 100°
0° to 360°
Adjust the Surveillance Angle Figure 2-5
Supplied Wrench Figure 2-6