Quick Start Guide
Table Of Contents
Network Bullet CameraยทQuick Start Guide
18
18
Wall Mounting with a Gang Box 2.3
An adapter plate should be purchased separately if you mount the
camera to a gang box.
Steps:
1. Install the adapter plate to the gang box.
2. Route the cables.
3. Fix the camera to the adapter plate with screws.
4. Adjust the surveillance angle according to step 3 in Chapter 2.1.
5. Install the water-proof jacket according to step 4 in Chapter 2.1.
Adapter Plate
Figure 2-7 Installation with a Gang Box