Quick Start Guide
Table Of Contents
Network Bullet Camera·Quick Start Guide
15
15
0°
~
100°
0°
~
360°
0°
~
360°
1
2
3
Adjust the Surveillance Angle Figure 2-3
Supplied Wrench Figure 2-4
4. (Optional) Install the water-proof jacket for network interface.
It is recommended to adopt the water-proof jacket (supplied) for
the network interface when the camera is installed outdoor.
1). If the network cable has been settled down, cut off the plug of
the network cable first.
2). Route the network cable through the following components in
sequence: fix nut, water-proof ring, and the main body of the
water-proof jacket, as shown in the figure.