Manual

Network Dome Camera·Quick Operation Guide
15
15
5. Adjust the focus and zoom.
1). Connect the VIDEO OUT interface of the camera to the
debugging monitor.
2). Set the iris type to MANUAL first.
3). Adjust the No.1 Zoom Lever (T~W) to select a proper angle of
view.
4). Adjust the NO.2 Focus Lever (F~N) to obtain a perfect image
on the monitor.
5). Set the iris type as MANUAL if the environment has a good
and stable illumination, and set the iris type as AUTO if the
environment has a strong and changeable illumination.
Adjust the Lens Figure 2-6
For the cameras adopts electronic lens, you can adjust the zoom and
focus by visiting the device, and adjust it from the PTZ control
interface.
1
2