User Manual

Network Camera User Manual
34
5.3.2 Capture Manually
Steps
1. Go to Configuration → Local.
2. Set the Image Format and saving path to for snapshots.
JPEG
The picture size of this format is comparatively small, which is better for network
transmission.
BMP
The picture is compressed with good quality.
3. Click Save.
4. Click near the live view or play back window to capture a picture manually.
5.3.3 Set Timing Wake
When the device is sleeping, it will wake up at the set time interval, and capture pictures and
upload them.
Steps
1. Go to Configuration → System → System Settings → Power Consumption Mode, under Sleep
Schedule, click the time schedule to set Sleep Capture Interval.
2. Enter Configuration → Event → Basic Event → Timing Wake.
3. Check Enable.
4. Select Capture Types.
5. For the linkage method settings, see Linkage Method Settings.
6. Click Save.
Result
The device will wake up at the set sleep capture interval, and capture pictures and upload them.
5.3.4 View and Download Picture
You can search, view and download the pictures stored in the local storage or network storage.
Steps
1. Click Picture.
2. Set search condition and click Search.
The matched pictures showed in the file list.
3. Select the pictures then click Download to download them.