User Manual

Network Camera User Manual
4
Chapter 13 Set EPTZ
EPTZ (Electronic PTZ) is a high-resolution function that digitally zooms and pans into portions of
the image, with no physical camera movement.
Before You Start
If you want to use the EPTZ function, make sure you have select the Fourth Stream in the live view.
Fourth stream and EPTZ should be both enabled simultaneously.
13.1 Patrol
Steps
1. Go to Configuration → EPTZ.
2. Check Enable EPTZ.
3. Check Fourth Stream.
4. Select Patrol in Application.
5. Click Save.
What to do next
For the detailed information about the patrol settings, see the PTZ operations on live view page.
13.2 Auto-Tracking
Steps
1. Go to Configuration → EPTZ.
2. Check Enable EPTZ.
3. Check Fourth Stream.
4. Select Auto-tracking in Application.
5. Click Detection Area to start drawing.
6. Click on the live video to specify the four vertexes of the detection area, and right click to
complete drawing.
7. Set rules.
Detection Target
Human and vehicle are available. If the detection target is not
selected, all the detected targets will be tracked, including the human
and vehicle.
Note
Only certain camera models support this function.