User Manual

Figure 6-6 Set Rule
5. Oponal: You can set the parameters of mulple areas by repeang the above steps.
6. For the arming schedule sengs, refer to Set Arming Schedule . For the linkage method
sengs, refer to Linkage Method Sengs .
7. Click Save.
6.2.10 Set
Unaended Baggage Detecon
It is used to detect the objects le over in the pre-dened region. Linkage methods can be
triggered
aer the object is le and stays in the region for a set me period.
Steps
1. Go to Conguraon → Event → Smart Event → Unaended Baggage Detecon .
2. Check Enable.
3. Select one Region. For the
detecon region sengs, refer to Draw Area .
4. Set rules.
Sensivity
Sensivity stands for the percentage of the body part of an acceptable target
that enters the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for
the target body part that goes across the pre-dened region. ST stands for the
complete target body. The higher the value of
sensivity is, the more easily the
alarm can be triggered.
Threshold It stands for the me of the objects le in the region. Alarm is triggered aer
the object is le and stays in the region for the set me period.
Network Camera User Manual
49