User Manual

3. Set the
Sensivity. The higher the value is, the more easily the change of scene can be
detected. But the detecon accuracy is reduced.
4. Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5. Click Save.
Note
The funcon varies according to dierent models.
6.2.4 Set Face Detecon
It helps to detect the face in the detecon region. If a face is detected, the device triggers the
linkage
acons.
Steps
1. Go to Conguraon → Event → Smart Event → Face Detecon .
2. Check Enable Face
Detecon.
3. Oponal: Highlight to display the face in the image.
1) Check Enable Dynamic Analysis For Face Detecon.
2) Go to Conguraon → Local , set Rules to Enable.
4. Set
Sensivity. The lower the sensivity is, the prole of the face or unclear face is more
dicult to detect.
5. Set the arming schedule and linkage methods. For the
informaon about arming schedule
sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage
Method
Sengs .
6. Click Save.
6.2.5 Set Video Loss
This funcon can detect the video signal loss in me and trigger the linkage acon.
Steps
1. Go to
Conguraon → Event → Basic Event → Video Loss .
2. Check Enable.
3. Refer to Set Arming Schedule for
seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
4. Click Save.
6.2.6 Set Intrusion
Detecon
It is used to detect objects entering and loitering in a pre-dened virtual region. If it occurs, the
device can take linkage
acons.
Network Camera User Manual
44