User Manual

Capture a picture when an event is triggered.
3. Set the Format,
Resoluon, Quality, Interval, and Capture Number.
4. Refer to Set Arming Schedule for conguring schedule me.
5. Click Save.
5.3.2 Capture Manually
Steps
1.
Go to Conguraon → Local .
2. Set the Image Format and saving path to for snapshots.
JPEG
The picture size of this format is
comparavely small, which is beer for network
transmission.
BMP
The picture is compressed with good quality.
3. Click Save.
4. Click
near the live view or play back window to capture a picture manually.
5.3.3 Set Timing Wake
When the device is sleeping, it will wake up at the set me interval, and capture pictures and
upload them.
Steps
Note
The funcon is only supported by certain device models.
1. Go to Conguraon → System → System Sengs → Power Consumpon Mode , under Sleep
Schedule, click the me schedule to set Sleep Capture Interval.
2. Enter
Conguraon → Event → Basic Event → Timing Wake .
3. Check Enable.
4. Select Capture Types.
5. For the linkage method
sengs, see Linkage Method Sengs .
6. Click Save.
Result
The device will wake up at the set sleep capture interval, and capture pictures and upload them.
Network Camera User Manual
35